.png)
VentArmor™ Retrofit Series
Soffit ventArmor™
Four sizes: Singles — Large 9" X 17", Medium 5" X 17", Small 5" X 5"; Continuous — 4.5" X 47". Designed to fit over the top of enclosed eave soffit vents. With four different sizes to choose from, this makes this product highly versatile. Soffit ventArmor™ gives soffit vents the required added protection against dangerous embers from entering combustible enclosed exterior soffits. Traditional soffit vents are made with built-in nylon screens, low grade metal mesh and/or openings that are larger than ⅛".
CIP Foundation ventArmor™
7.25" x 5.75". Designed to be press fit into the square openings in traditional/typical Cast in Place Foundation Vents. CIP Foundation ventArmor™ helps prevent the entrance of dangerous embers into combustible crawl spaces. Traditional/typical cast in place foundation vents have built-in low grade metal mesh with openings that are too large at ¼".
Eve/Bird Block ventArmor™
3.25" X 17". Designed to fit directly over the vented eave blocks, also known as bird blocks. Eve/Bird Block ventArmor™ gives the vent openings a much higher layer of dangerous ember defense. Traditional eave blocks use low grade metal mesh that is installed on the inside of the block over the cut outs. This leaves the block itself and the attic vulnerable to dangerous embers.
Light is a clean and stylish font favored by designers. It's easy on the eyes and a great go-to font for titles, paragraphs & more.
Low Profile ventArmor™
3" X 48", Hemmed 2 sides only. Designed to be installed from the inside of the attic on the underside of off eave vents commonly called smart vents, core vents or stealth vents. Low Profile ventArmor™ helps prevent dangerous embers from entering the low parts of an attic. Traditional/typical vents of this kind are made entirely of combustible plastics.
Continuous Ridge ventArmor™
Preformed 4.75" X 47". Available in Black Powder Coated. Designed to easily fit over the continuous ridge vent to keep dangerous embers from entering the attic that pass through and/or melt the built-in oversized combustible plastic screens that are on most all conventional ridge vent products.
Box ventArmor™
11" X 11". Designed to be installed from inside of the attic on the underside of box vent cut outs in the roof sheathing. Box ventArmor™ helps keep dangerous embers out of the attic that can enter through the oversized louvers and/or combustible nylon mesh screens built into most conventional box vents.
Dormer ventArmor™
Special Order — Provide Rough Opening Size(s)
Gable ventArmor™
Special Order — Provide Rough Opening Size(s)
Our products are compatible with the following building codes and standards used throughout
the Western US:
The IBHS Wildfire Prepared Home Program, The International Residential Code - IWUIC,
The Colorado Wildfire Resiliency Code CWRC, The Oregon ORSC R327, The California
CRC Chapter 7A and The California CWUIC (off ridge and ridge vents)