SolarBarrier — 5.5 in Black-Coated Stainless — 47 in Panel

Sold per finished panel. Standard J-hooks and matching locking washers are included for compatible lip-frame systems. Installation and lipless-frame adapters are separate.

SolarBarrier is preformed stainless steel mesh for solar-array perimeter protection against pests, nesting and debris nationwide, with an ember-resistant mesh application as part of a broader wildfire-resilience plan. This panel has a 5.5-inch finished upright height, a 47-inch finished length and a separate 1-inch planar leg. The leg is not included in the upright height. Finish: black-coated stainless.

Listed price: $25.42 per panel. Contractors: request first-order pricing before ordering. Compare SolarBarrier options

SolarBarrier shipping is $9.99 per U.S. order. Other products may add their own shipping charges. Applicable tax is calculated at checkout.

Type 304 stainless steel with nominal 0.028-inch wire and nominal 3/32-inch clear openings. Hemmed edges, fabrication and standard packaging are included. Standard finished upright heights are 4.5 and 5.5 inches; 3.75 inches is available by measurement/custom fit. Each full panel includes five J-hooks with matching locking washers for a compatible lip-frame attachment.

Professional installation is recommended. Confirm the module and mounting system, roof material, minimum and maximum roof-to-frame clearance, and the attachment method before ordering. Maintain required ventilation, drainage and service access.

Lipless or box-frame modules: FireTek has used SnapNrack Add-a-Lip model 242-01101 successfully with SolarBarrier. It is sold separately at $8.95 per adapter or $179 for 20. Confirm the module frame geometry and the manufacturer’s 30–46 mm clamping range. Quote adapters by required attachment count, not by panel footage; confirm supply before ordering.

Measure the minimum and maximum roof-to-frame clearance along each uninterrupted edge, including the roof profile. Follow FireTek’s guide for five attachments per full 47-inch panel, within 3 inches of the ends and no more than 12 inches on center. Follow SnapNrack’s own instructions for adapter fit and installation. Do not substitute another screen system’s fastening spacing.